Marine products such as Marine balls, Marine launching airbags, Marine inflatable fenders and Marine inflatable balls are produced to better protect our lives. Today we must understand how to pass the problem of Marine ball inspection. In view of some characteristics of the ship's own ball and its own performance, we should also understand that the detection of the ball itself should also pay attention to it. It is also very important for the ship to detect the ball itself. Not only does it need to be tested at the factory, but it's also important to check when to buy it. Below we explain the experiment to be done when the Marine ball is delivered.

First, we need to know what we need to test and what to look out for when testing the boat's touch ball. We need to test the size of the ball. To detect the spacecraft's landing ball, we need to do it at initial inflation pressure. We need to have a clear detection of the length and diameter of the ship's landing ball. The size of the first measurement is usually maintained on a +%10, -5% basis. Whatever it is, it should have a good grasp of the size of the first measurement. For their own diameter and other aspects of the measurement should pay attention to, but when we measure, to measure more oh, and then combined with the average. Do you also need to pay special attention to it? In fact, there are many requirements for airtight testing, but we must be clear about the landing preparation of this ship and its own measurements. Generally, no leakage is required within 30 minutes.

Through the knowledge of how to detect the ball on the ship, we must now have a relative understanding of the detection of the ball on the ship. I hope the above knowledge is helpful to you. If you need to buy Marine products, you can contact us at any time or go to our company for specific understanding and business exchanges, we look forward to your arrival。